Jeuxlinux - Le site des jeux pour linux - Forum

Ok je l'ai mais rien n'a changé, remarque au moins rien n'est perdu...

ps:Ah en fait mon PC utilise pas 1Mo mais moins encore...

Dernière modification par boss_78 (05-02-2007 17:19:00)

lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 81)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: S3 Inc. ProSavage KM133 (rev 03)


xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    FontPath    "/usr/share/X11/fonts/misc"
    FontPath    "/usr/share/X11/fonts/cyrillic"
    FontPath    "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/Type1"
    FontPath    "/usr/share/X11/fonts/100dpi"
    FontPath    "/usr/share/X11/fonts/75dpi"
    FontPath    "/usr/share/fonts/X11/misc"
    # path to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load    "i2c"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr"
    Option        "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ExplorerPS/2"
    Option        "ZAxisMapping"        "4 5"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
    Identifier    "S3 Inc. ProSavage KM133"
    Driver        "savage"
    BusID        "PCI:1:0:0"
    VideoRam     131072
EndSection

Section "Monitor"
    Identifier    "DELL D825TM"
    Option        "DPMS"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "S3 Inc. ProSavage KM133"
    Monitor        "DELL D825TM"
    DefaultDepth    16
    SubSection "Display"
        Depth        1
        Modes        "1024x768" "800x600" "720x400" "720x350" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1024x768" "800x600" "720x400" "720x350" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1024x768" "800x600" "720x400" "720x350" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1024x768" "800x600" "720x400" "720x350" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1024x768" "800x600" "720x400" "720x350" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1024x768" "800x600" "720x400" "720x350" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice     "stylus" "SendCoreEvents"
    InputDevice     "cursor" "SendCoreEvents"
    InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
    Mode    0666
EndSection

Désolé mais je sais pas d'ou viens ton problème

Non les 3 sont installés.
Résultat de glxinfo
name of display: :0.0
libGL warning: 3D driver claims to not support visual 0x42
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: S3 Graphics Inc.
OpenGL renderer string: Mesa DRI ProSavage 20050829 AGP 1x
OpenGL version string: 1.2 Mesa 6.5.1
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
    GL_ARB_texture_compression, GL_ARB_texture_env_add,
    GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_histogram, GL_EXT_packed_pixels,
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
    GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_IBM_rasterpos_clip,
    GL_IBM_texture_mirrored_repeat, GL_MESA_window_pos,
    GL_NV_light_max_exponent, GL_NV_texgen_reflection, GL_OES_read_format,
    GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x22 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x23 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x24 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x25 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x26 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x27 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x28 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x29 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x42 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon

Diablo150 a écrit:

Si la prochaine version d'ubuntu supporte ta carte, pourquoi ne pas essayer avec la version de développement:
http://ubuntu-cdimage.datahop.it/releas … ty/herd-4/

Une fois la version finale disponible (dans 2 mois je crois), il te suffira de faire un:
apt-get dist-upgrade

Pour mettre à niveau ta distro

As tu suivi le conseil de Diablo150 ?